|
Hydraulics training in the United States:
Bosch Rexroth Hydraulics Training Center located within
Bethlehem Area Vocational Technical School (BAVTS)
3300 Chester Avenue
Bethlehem, PA 18017
Principles of Hydraulics - 5 days
January 23 - 27, 2012 (BAVTS - PA)
February 13 - 17 (BAVTS - PA)
March 12 - 16 (BAVTS - PA)
April 16 - 20 (BAVTS - PA)
May 14 - 18 (BAVTS - PA)
June 11 - 15 (BAVTS - PA) |
July 16 - 20, 2012 (BAVTS - PA)
August 13 - 17 (BAVTS - PA)
September 10 - 14 (BAVTS - PA)
October 8 - 12 (BAVTS - PA)
November 12 - 16 (BAVTS - PA)
December 3 - 7 (BAVTS - PA) |
Mobile Hydraulic Technology - 5 days
February 6 - 10, 2012 (BAVTS - PA)
Maintenance, Repair & Setup of Industrial Hydraulic Systems * - 5 days
January 30 - February 3, 2012 (BAVTS - PA)
March 5 - 9 (BAVTS - PA)
June 18 - 22 (BAVTS - PA)
September 24 - 28 (BAVTS - PA)
November 5 - 9 (BAVTS - PA) |
Maintenance, Repair & Setup of Mobile Hydraulic Systems * - 5 days
March 26 - 30, 2012 (BAVTS - PA)
Fundamentals & Servicing of Proportional Valves * - 5 days
April 23 - 27, 2012 (BAVTS - PA)
October 15 - 19 (BAVTS - PA) |
Pumps & Controls, Open Loop * - 5 days
May 7 - 11, 2012 (BAVTS - PA)
August 6 - 10 (BAVTS - PA)
Pumps & Controls, Closed Loop * - 5 days
August 27 - 31, 2012 (BAVTS - PA)
Design Considerations for Industrial Hydraulic Systems * - 5 days
June 25 - 29, 2012 (BAVTS - PA)
Design Considerations for Mobile Hydraulic Systems * - 5 days
October 29 - November 2, 2012 (BAVTS - PA)
Proportional & Servo Circuit Design * - 5 days
July 30 - August 3, 2012 (BAVTS - PA)
Electronic Controls for Hydraulic Systems * - 5 days
September 17 - 21, 2012 (BAVTS - PA)
* prerequisites apply - please see the Bosch Rexroth training brochure.
|
|
